91郭肱利

Intended for Healthcare Professionals

AFFIXUS速 Hip Fracture NailSystem

Combines the principles of a compression hip screw with an Intramedullary nail

Affixus Product Overview
OverviewSystem FeaturesSpecificationsBenefitsEducationVideos

Simple. Anatomic. Versatile.

The AFFIXUS速Hip Fracture Nail Systemdesigned to providean efficient, practical solution for treating a wide range of proximal femoral fractures.

Anatomy

  • 堰庄沿油温稼糸油酷艶馨顎姻

Product Type

  • Intramedullary Nailing

System Features

The system combines the principles of a compression hip screw with the biomechanical advantage of an intramedullary nail. By combining a proximal 1.8M radius of curvature with a 3 degree distal bend, the resultant bow is comparable to a proximal 1.5M radius of curvature with a minimal offset. This not only accommodates the anterior bow of the natural femur, but also is designed to help ease insertion through theproximal region and minimize the risk of penetrating the anterior cortex.

Goal postTechnology

The Goal Post Technology is designed to facilitate visualization of the femoral neck on the lateral view in order to accurately place the guide pin for the lag screw. The anterior and posterior metal posts on the proximal aspect of the insertion jig allow for an unobstructed fluoroscopic view down to the base of the femoral neck and assist with fine tuning of the guide pin before it is fully seated in the femoral head.

Anti-Rotation Hole

The nail isdesignedto include an anti-rotation (AR) hole, which can be used as a utility hole to provisionally stabilize a fractured femoral neck and head segment during the lag screw placement or for placement of an AR screw, if desired.

Lag Screw Design

The lag screw was designed with a reverse buttress thread pattern, which isintended to providesubchondral support under load, while also helping minimize potential for cut-out. The lag screw has wide slots or grooves providing the surgeon approximately 15属 of adjustment when tightening the set screw. Also, the lag screw has a shoulder whichis intended to preventmedial migration.

Jig Assembly

Since the system offers two different nail angles, 125属 and 130属: the system includestwoeasyto use jig assemblies that correspond to the neck angle of the implant. The jig assembly was also designed to include a jig tab. This jig tab mates with the implant nail slot to ensure both the targeting jig and implant neck shaft angle match. During use, if it is difficult to attach the nail to the jig assembly, it can simply be confirmed that the nail and jig assembly are identified with the same neck shaft angle.

On the proximal portion of the jig assembly, there are two holes, where a 3.2 mm guide pin can be placed. Under lateral fluoroscopy, this guide pin gives a visual indication to the potential starting point of the 3.2 mm guide pin.

酷鉛艶恰庄恢鉛艶油鴛稼壊岳姻顎馨艶稼岳壊

The system includes two flexible instruments where flexibility makes sense. When preparing the femoral canal, a flexible entry reamer has been designed to help with the entry on larger patients. This reamer will bend to help gain proper entry into the femoral canal. Also, flexibility has been added to the jig bolt driver. This allows the surgeon to easily tighten down the jig bolt inside the jig assembly

Compression Wheel

This system includes a one piece compression wheel assembly that can be easily placed unto the lag screw driver by sliding the wheel device unto the lag screw driver without disassembling instrumentation. Rotate the compression wheel clockwise to compress the intertrochanteric component of the fracture.

Reduction Tools

Thesystem comes with several useful reduction tools to aid in gaining proper alignment, length, and rotation. These tools are a ball spike pusher, bone hook, femoral bone clamp, pistol guidewire gripper, guidewire pusher and long reduction tool.

Lag Screw Drill

The lag screw drill includes a pre-assembled depth stop device. After taking measurement of the lag screw, set the measurement length on the lag screw drill by pushing the side buttons and sliding the depth stop forward or backward to the desired measurement length. There is also a notch on the lag screw drill that is visible under fluoroscopy. This notch is a visual reference of 100 mm lag screw length.

Specifications

Benefits

Simple

  • Procedurally oriented tray layout with streamlined and color-coded instruments to aid in procedural efficiency.

Anatomic

  • Optimal nail geometry withuniquedistal bend aid in placement of the implant within the femoral head and intramedullary canal.

Versatile

  • Extensive range of nail lengths and diameters targeting utility hole andrevision option offering the ability to customize the procedure.

Education

Literature

AFFIXUS Hip Fracture NailSurgical Technique

AFFIXUS速 Hip Fracture NailProduct Brochure

AFFIXUS速 Hip Fracture NailQuick Reference Guide

Surgical Approach:

The innovative features in the AFFIXUS速 Hip Fracture Nail System provide pre-assembled set screws, GOAL POST立 technology, anatomic bends, comprehensive sizes and an anti-rotation hole.

Videos

Click to play video
AFFIXUS Hip Fracture Nail System- Short Nail

Click to play video
AFFIXUS Hip Fracture System-Long Nail

Click to play video
AFFIXUS Product Overview

Tailored resources for your patients.

Find videos, articles, and interactive content to guide your patients throughout their surgical journey on ReadyPatient.com, our dedicated patient recovery site.

All content herein is protected by copyright, trademarks and other intellectual property rights, as applicable, owned by or licensed to 91郭肱利 or its affiliates unless otherwise indicated, and must not be redistributed, duplicated or disclosed, in whole or in part, without the express written consent of 91郭肱利.

This material is intended for health care 91郭肱利. Distribution to any other recipient is prohibited.

For product information, including indications, contraindications, warnings, precautions, potential adverse effects and patient counseling information, see theinstructions for use or contact your local representative; search this website for additional product information.To obtain a copy of the current Instructions for Use (IFU) for full prescribing and risk information, please visit or call1-800-348-2759, press 4 for 411 Technical Support.